Decware SE84CS Spécifications télécharger pdf (Page 8)

8

DIMENSIONS

The SE84C amplifier is 6 inches wide by 11.50

inches deep with a height of 6.5 inches.

PLACEMENT

We recommend keeping a 2 inch spacing

on all sides and at least 6 to 10 inches of

space above the amplifier.

Avoid closed cabinets. The better the venti-

lation around your amplifier the cooler it will

run.

HEAT OUTPUT

This is a Class A amplifier where the tubes

idle at near full power at 47 miliamps each. It

is designed to run at a temperature that

humans would perceive as hot. The actual

temperature of the power transformer and

metal parts of the amplifier will depend on

the following conditions:

• Ambient room temperature. At 70 degrees F.

the amp should run at around 118 degrees.

• Volume level. The amp will generate less heat

at lower volumes then at higher volumes.

• Amount of time the amplifier has been on.

Depending on the two variables above it can

take up to several hours to reach full temper-

ature.

NOTE: in rooms with high ambient tempera-

tures the SE84C could after many hours

reach temperatures of 140 degrees, although

it requires a worse case scenario to achieve

that temperature. This is the maximum

allowable temperature recommended for op-

eration as anything higher could burn you.

If you turn your amp off when not in use and

your listening room isn’t baking hot, you’ll

find your SE84C to average a comfortable

115 degrees F. This is cool enough to keep

your hand on the power transformer for ex-

tended periods of time.

You will find where heat is concerned, that

after about 30 minutes or so once the amp

has become warm, the sound will be better

then when the amp is ice cold.

1 2 3 4 5 6 7 8 9 10 11

Commentaires sur ces manuels

Pas de commentaire